Nortiv 8 Nano Composite Toe Work Boots Review

We may earn a commission from some links on this page.

The Nortiv 8 Nano Composite Toe Work Boot is a lace-up safety boot built around a non-metal composite toe. The maker lists it as meeting ASTM F2412-24 for toe impact resistance, ASTM F2412-24 EH for electrical hazard resistance and ASTM F2913-24 SR for slip resistance. The upper is nylon fabric with TPU, there is a breathable mesh lining, a synthetic leather insole, an EVA midsole and a rubber outsole. It comes in regular and wide widths. This review sets out what the maker states about the boot, what the ratings mean in practice and what to check before you order a pair.

Key Takeaways

  • A non-metal nano composite toe, listed as meeting ASTM F2412-24 for impact resistance.
  • The maker also lists ASTM F2412-24 EH electrical hazard resistance and ASTM F2913-24 SR slip resistance.
  • Nylon fabric and TPU upper with a breathable mesh lining and a synthetic leather insole.
  • EVA midsole and a slip-resistant rubber outsole.
  • Regular and wide widths, with a 30-day return window under the shop's stated conditions.

What the Nano Composite Toe Is For

The point of a composite toe is protection without steel. The maker states that the nano toe is corrosion-resistant and does not transmit heat or cold, which it says keeps feet from getting overheated. For anyone who works outdoors in summer or walks in and out of cold stores, that difference matters more than the toe's weight.

The maker names the trades the boot is aimed at: construction workers, electricians, plumbers, welders, miners and other demanding sites. The electrical hazard rating is listed as ASTM F2412-24 EH, which is the standard for boots meant to reduce the risk of a circuit forming through the body. The slip rating is listed as ASTM F2913-24 SR, tested on a standard surface.

Those ratings describe what the boot has been tested to. They do not replace your employer's own safety requirements, so check the rating the site asks for before ordering.

Upper, Lining and Fit

The upper is a mix of nylon fabric and TPU. Nylon fabric keeps the boot light and lets air through, while the TPU panels give the shape and hold around the heel and midfoot. Inside there is a breathable mesh lining and a synthetic leather insole, so the foot sits on a textured surface rather than a bare sole.

Fit is the part worth planning. The maker lists sizes from US 7 to 14 and offers both regular and wide widths, A wide option helps if you wear thick work socks or have a broad forefoot, and it is the first thing to look at if a regular width usually pinches at the sides.

Feature What the maker states
Toe Nano composite, ASTM F2412-24
Upper Nylon fabric and TPU
Lining Breathable mesh
Insole Synthetic leather
Midsole EVA
Outsole Slip-resistant rubber
Widths Regular and wide

Measure your foot late in the day and compare it with the maker's size guide rather than your usual sneaker size, because work boots are worn with different socks.

Detailed Features

The build is aimed at site work rather than weekend wear, and the maker's feature list reads that way:

  • Nano composite toe: non-metal protection that meets ASTM F2412-24 for impact resistance.
  • Electrical hazard protection: listed as ASTM F2412-24 EH.
  • Slip-resistant rubber outsole: listed as ASTM F2913-24 SR for slip resistance.
  • EVA midsole: a supportive layer under the foot.
  • Nylon and TPU upper with mesh lining: a light, breathable build rather than an all-leather shell.

The maker also sells the same boot in a mesh version, a nine-inch version, a plain regular toe and a waterproof version, so the exact toe and upper you get depends on the option you pick on the product page.

Advantages and Disadvantages

The strengths are the ones a safety boot needs: a rated composite toe, rated slip resistance and an electrical hazard rating, all without the weight and cold transfer of a steel cap. The maker also offers regular and wide widths, which makes it easier to get a workable fit.

On the other side, the boot is not sold as waterproof unless you choose the waterproof option, so a wet site needs that version or a treatment. The outsole is rubber and the upper is fabric and TPU rather than leather, so heavy abrasion against concrete and sharp edges will show on it sooner than on a leather work boot. The toe is composite rather than steel, which suits anyone who wants a non-metal toe but is a harder choice if a site insists on steel.

The maker's return policy is 30 days from delivery on unworn boots in the original packaging, with the buyer paying return shipping, so check the size before you wear them outside.

Water Resistance and Care

The base boot is not described as waterproof. The maker lists a waterproof version on the same product page, which is the one to choose if you work in wet conditions.

For any work boot, the care routine is the same: brush off mud and grit before it dries into the seams, wipe the upper with a damp cloth rather than soaking it, and let the boots air dry away from direct heat. Stuffing newspaper inside pulls moisture out without cooking the materials. A water-repellent spray suited to fabric and synthetic uppers will help the outer shed water, but it is not a substitute for a waterproof build.

Who These Boots Suit

These boots suit anyone who needs a rated composite-toe boot for site, yard or warehouse work and wants a lighter build than a steel-toe leather boot. They also suit a broader foot, thanks to the wide width option, and anyone whose employer asks for a non-metal toe.

They are a weaker fit for wet work unless you choose the waterproof version, and for anyone who wants a leather boot that takes a polish and shrugs off scrapes. If you need a taller boot or a low-cut work shoe instead, the two options below cover those cases.

Frequently Asked Questions

Is the toe steel or composite?

It is composite. The maker describes a nano composite toe that meets ASTM F2412-24 for impact resistance and says it is corrosion-resistant and does not transmit heat or cold.

Are these boots electrical hazard rated?

The maker lists ASTM F2412-24 EH electrical hazard resistance for the boot. That is the rating to quote to an employer, and the site rules still decide whether it is acceptable.

Do they come in wide widths?

Yes. The maker offers regular and wide widths and lists sizes from US 7 to 14.

Are these boots waterproof?

The base version is not described as waterproof. The maker offers a waterproof version on the same product page, which is the one to order for wet work.

What is the return policy?

The shop states a 30-day return window from delivery on unworn boots in the original packaging, with the buyer covering return shipping. Check the fit before wearing them outdoors.