BRUNO MARC Men's Non Slip Work Sneakers Review

We may earn a commission from some links on this page.

The BRUNO MARC Men's Comfortable Non-Slip Work Sneakers are a light work shoe built from vegan leather and knitted fabric, with a mesh lining, an EVA midsole and a rubber outsole that the maker lists as meeting the ASTM F2913-19 standard for slip and oil resistance. They also carry an ASTM F2892 electrical hazard rating. This review sets out what the maker states about the upper, the sole, the cushioning and the fit, and where the design stops short.

Key Takeaways

  • The rubber outsole meets the ASTM F2913-19 standard for slip and oil resistance, as stated by the maker.
  • An ASTM F2892 rating is listed to reduce the risk of electric shock in dry conditions.
  • The upper is knitted fabric with vegan leather panels, lined with mesh for airflow.
  • A shock-absorbing EVA midsole and a mesh-covered EVA insole are listed for all-day comfort and arch support.
  • The maker lists no safety toe, so these are work sneakers for shops and floors rather than for impact protection.

Knitted Upper and Work Shoe Shape

The shoe is shaped like a sneaker rather than a boot. Bruno Marc describes an upper of knitted fabric and vegan leather, lined with mesh. Knitted fabric is the flexible part that lets the shoe move with the foot; the vegan leather panels give the shape some structure around the toe and the sides.

That mix is the reason this pair looks like a work trainer rather than an Oxford. The maker calls it a professional shoe for work environments, and pairs the knitted upper with a plain black finish so it does not stand out on a shop floor or a service counter.

What the maker does not list is a waterproof membrane or a water-resistant coating. The mesh lining will breathe on a warm shift, but a wet floor or steady rain is a different question, and there is no claim here to cover it.

Slip and Oil Resistance

Slip resistance is where this pair is strongest, at least on paper. Bruno Marc states that the rubber outsole meets the ASTM F2913-19 standard for slip and oil resistance, which is the test used for footwear worn in workplaces with greasy or wet floors.

That rating is the practical difference between a work sneaker and a trainer with a soft foam sole. On a tiled kitchen floor or a workshop with oil on the ground, the outsole compound and the tread pattern are what keep you upright, and an ASTM F2913-19 result is the maker's evidence for both.

Cushioning and Arch Support

The cushioning comes from two EVA parts. Bruno Marc lists a shock-absorbing EVA midsole under the foot and a mesh-covered EVA insole above it, and describes the insole as ergonomically designed with arch support.

EVA is the light foam used in most walking and running shoes. It gives a softer ride than a hard rubber sole, which is what a long shift on concrete asks for, and it keeps the shoe light enough to wear like a trainer.

The maker does not say whether the insole lifts out. If you wear your own inserts to work, that is worth checking with the shop first, because a fixed insole has to be worn over rather than replaced.

Detailed Features

Here is what Bruno Marc lists for the shoe, gathered in one place.

Feature What the Maker States
Upper Knitted fabric with vegan leather panels
Lining Mesh
Insole Mesh-covered EVA with arch support
Midsole Shock-absorbing EVA
Outsole Rubber, ASTM F2913-19 slip and oil resistance
Electrical ASTM F2892 rating to reduce shock risk
Sizes US 6.5 to 13

Advantages and Disadvantages

The case for the shoe is straightforward. It carries a slip and oil resistance standard and an electrical hazard rating, it is built on cushioning foam rather than a hard sole, and it looks like a trainer, which suits workplaces that do not require a boot. The mesh lining and knitted upper are chosen for breathability on a long shift, and the size run goes from a US 6.5 to a 13.

The limits matter just as much. There is no safety toe listed, so the shoe offers no protection against a dropped weight or a rolling load, and no metatarsal guard. It is not described as waterproof, which rules it out for wet work. The maker also lists one colour, black, and does not publish the shoe's weight, so the light feel has to be judged on the materials rather than a number.

Electrical Hazard Rating

The ASTM F2892 rating is the second safety claim on the page. It covers footwear built to reduce the risk of electric shock when the sole is intact and the shoe is dry, which is why electrical hazard shoes are never described as protection against live circuits.

For anyone working around wiring, tools or machinery, it is the kind of line worth reading on the maker's page rather than guessing from the look of the sole. Bruno Marc states the rating plainly, and pairs it with the slip-resistant outsole so the two claims sit on the same pair.

Frequently Asked Questions

Does This Shoe Have a Safety Toe?

No. Bruno Marc lists slip resistance and an electrical hazard rating, but no safety toe, composite toe or metatarsal guard. If your workplace requires toe protection, look for a rated boot instead.

Are They Suitable for Kitchens and Wet Floors?

The outsole is listed as meeting the ASTM F2913-19 slip and oil resistance standard, which is the rating kitchens and food service ask for. The upper is knitted fabric and mesh, though, and the maker lists no waterproofing, so splashes will soak through.

What Sizes Are Available?

The shoe is listed in US sizes 6.5 to 13 are listed in US sizes 6.5 to 13, in black. Bruno Marc offers a 30-day return window on the pair.